# Makefile.in generated by automake 1.9.5 from Makefile.am.
# tutorial/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/gnuplot
pkglibdir = $(libdir)/gnuplot
pkgincludedir = $(includedir)/gnuplot
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = tutorial
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/apple.m4 \
	$(top_srcdir)/m4/beos.m4 $(top_srcdir)/m4/msdos.m4 \
	$(top_srcdir)/m4/next.m4 $(top_srcdir)/m4/pkg.m4 \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /u8/plamopack1/gnuplot/gnuplot/missing --run aclocal-1.9
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /u8/plamopack1/gnuplot/gnuplot/missing --run tar
AUTOCONF = ${SHELL} /u8/plamopack1/gnuplot/gnuplot/missing --run autoconf
AUTOHEADER = ${SHELL} /u8/plamopack1/gnuplot/gnuplot/missing --run autoheader
AUTOMAKE = ${SHELL} /u8/plamopack1/gnuplot/gnuplot/missing --run automake-1.9
AWK = gawk
BUILD_SRC_BEOS_SUBDIR_FALSE = 
BUILD_SRC_BEOS_SUBDIR_TRUE = #
BUILD_WXWIDGETS_FALSE = 
BUILD_WXWIDGETS_TRUE = #
CAIRO_CFLAGS = -I/usr/X11R6/include/freetype2 -I/usr/X11R6/include -I/usr/include/cairo -I/usr/include/libpng12 -I/usr/include/freetype2  
CAIRO_LIBS = -L/usr/X11R6/lib -lcairo -lpng12 -lXft -lfreetype -lz -lXrender -lX11 -lXext -lfontconfig  
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS =   -I/usr/X11R6/include
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DVIPS = dvips
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EMACS = emacs
EXEEXT = 
GDLIB_CONFIG = 
GIHDIR = ${prefix}/share/gnuplot/4.1
GNUPLOT_X11 = gnuplot_x11${EXEEXT}
GTK28_CFLAGS = 
GTK28_LIBS = 
GTK_CFLAGS = 
GTK_LIBS = 
INCLUDE_BINARY_C_FALSE = 
INCLUDE_BINARY_C_TRUE = #
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LASERGNU = lasergnu-noinstall
LATEX = latex
LDFLAGS = 
LIBOBJS = 
LIBRARIES_FOR_X =  -L/usr/X11R6/lib -lX11 
LIBS = -lm 
LINUXSUID = 
LISPDIR = lisp
LTLIBOBJS = 
MAKEINFO = ${SHELL} /u8/plamopack1/gnuplot/gnuplot/missing --run makeinfo
OBJEXT = o
PACKAGE = gnuplot
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_VERSION = 
PANGOCAIRO_CFLAGS = -I/usr/include/pango-1.0 -I/usr/X11R6/include -I/usr/X11R6/include/freetype2 -I/usr/include/cairo -I/usr/include/libpng12 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2  
PANGOCAIRO_LIBS = -L/usr/X11R6/lib -lpangocairo-1.0 -lcairo -lpangoft2-1.0 -lpng12 -lXft -lfreetype -lz -lXrender -lX11 -lXext -lpango-1.0 -lm -lfontconfig -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0  
PANGO_CFLAGS = -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
PANGO_LIBS = -lpango-1.0 -lm -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0  
PATH_SEPARATOR = :
PDFLATEX = pdflatex
PDFLIB_CONFIG = 
PKG_CONFIG = /usr/bin/pkg-config
PLAINTEX = tex
SET_MAKE = 
SHELL = /bin/sh
STRIP = 
TERMLIBS =   -lz
TERMXLIBS = 
TROFF = troff
TUTORIAL = notutorial
U = 
VERSION = 4.1.0
VERSION_MAJOR = 4.1
WX_CONFIG = no
WX_LIBS = 
X_CFLAGS =  -I/usr/X11R6/include
X_EXTRA_LIBS = 
X_LIBS =  -L/usr/X11R6/lib
X_PRE_LIBS =  -lSM -lICE
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_STRIP = 
ac_pt_PKG_CONFIG = /usr/bin/pkg-config
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build_alias = 
datadir = ${prefix}/share
exec_prefix = ${prefix}
host_alias = 
includedir = ${prefix}/include
infodir = ${prefix}/share
install_sh = /u8/plamopack1/gnuplot/gnuplot/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/share
mkdir_p = mkdir -p --
oldincludedir = /usr/include
prefix = /usr
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
subdirs =  lisp
sysconfdir = ${prefix}/etc
target_alias = 
AUTOMAKE_OPTIONS = foreign 1.2h
PLT_FILES = eg1.plt eg2.plt eg3.plt eg4.plt eg5.plt eg6.plt eg7.plt \
linepoin.plt test.plt 

EXTRA_DIST = Makefile.am.in $(PLT_FILES) \
header.tex makefile.dst tutorial.tex eg3.dat

CLEANFILES = tutorial.aux tutorial.dvi tutorial.log tutorial.pdf tutorial.ps \
tutorial.toc eg1.tex eg2.tex eg3.tex eg4.tex eg5.tex eg6.tex eg7.tex \
eg7.eps eg7.pdf test.tex

SUFFIXES = .dvi .plt .pdf .tex .ps
RUN_GNUPLOT = if test -x $(top_builddir)/src/gnuplot ; then \
	  GNUPLOT_PS_DIR=$(top_srcdir)/term/PostScript \
	  GNUPLOT_LIB=$(srcdir) \
	  GNUTERM=latex \
	  $(top_builddir)/src/gnuplot $< ; \
	else \
	  gnuplot $< ; \
	fi

all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .plt .pdf .tex .ps .eps
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tutorial/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  tutorial/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
uninstall-info-am:
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am:

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf-am:

ps-am:

uninstall-am: uninstall-info-am

.PHONY: all all-am check check-am clean clean-generic distclean \
	distclean-generic distclean-local distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-exec install-exec-am install-info \
	install-info-am install-man install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
	pdf-am ps ps-am uninstall uninstall-am uninstall-info-am


# default target
all: notutorial

tutorial: tutorial.dvi

notutorial:

# To touch it up after changes:
remake: tutorial.dvi

ps: tutorial.ps

tutorial.ps: tutorial.dvi

pdf: tutorial.pdf

tutorial.dvi: eg1.tex eg2.tex eg3.tex eg4.tex eg5.tex eg6.tex eg7.tex eg7.eps test.tex \
	tutorial.tex header.tex
	@echo Building LaTeX tutorial
	TEXINPUTS=.:$(srcdir):${TEXINPUTS}: $(LATEX) tutorial
	TEXINPUTS=.:$(srcdir):${TEXINPUTS}: $(LATEX) tutorial

tutorial.pdf: eg1.tex eg2.tex eg3.tex eg4.tex eg5.tex eg6.tex eg7.tex eg7.pdf test.tex \
	tutorial.tex header.tex
	@echo "Building LaTeX tutorial (PDF version)"
	TEXINPUTS=.:$(srcdir):${TEXINPUTS}: $(PDFLATEX) tutorial
	TEXINPUTS=.:$(srcdir):${TEXINPUTS}: $(PDFLATEX) tutorial

eg7.eps: eg7.plt
	$(RUN_GNUPLOT)

.dvi.ps:
	$(DVIPS) -o $@ $<

.plt.tex:
	$(RUN_GNUPLOT)

.eps.pdf:
	epstopdf $<

distclean-local:
	@if test "$(top_srcdir)" != "$(top_builddir)" ; then \
	  rm -f eg3.dat; \
	fi

Makefile.am: Makefile.am.in
	rm -f $@ $@t
	sed -n '1,/^##plt-files-begin/p' Makefile.am.in > $@t
	echo PLT_FILES = *.plt | fmt | (tr '\012' @; echo ) \
	  |sed 's/@$$/%/;s/@/ \\@/g;' | tr @% '\012 ' >> $@t
	sed -n '/^##plt-files-end/,$$p' $< >> $@t
	chmod a-w $@t
	mv $@t $@
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
